Which acog reticle is best

This automatically adjusts the brightness for you, based on the ambient light surrounding you. The tritium works to illuminate your reticle at night and the fiber optics work during the day. The reticle itself is a red chevron ranging reticle. The chevron pulls your eye to the center of target, so you can acquire your target fast. Even better than the 4x that Trijicon offers.

And with the longer eye relief, you can mount this a little further out from yourself and still get an accurate sight picture. Plus, you can purchase the Trijicon eyepiece that makes the eyecup much more comfortable pushed up against your face and gives you just a little extra eye relief. This gives you a much better field of view and allows you to use more of your peripheral vision. Not only is that a huge advantage when it comes to close quarters combat, it also makes target acquisition much faster.

It is made of aircraft quality aluminum that is almost impossible to dent or damage. Zeroing on this scope is the same process as any other and I found it to be quick and easy. In fact, after only a few minutes, I had such tight groups at yards that I could cover them with a nickel!

I have to say that the 0. And, at distances of yards, I can still make very accurate shots. The sweet spot is somewhere in between at about yards. At that range, I can shoot holes through holes. Vertical parallax is non-existent. The lenses are fully multi-layer coated for reduced glare and color distortion so you get a bright, accurate sight picture.

The quality of the glass and multi-coated lenses maximize light-gathering capabilities and enable a clear field of view with zero distortion. The optics are ultra-clear with unbelievable light-gathering thanks to the dual fiber optic and tritium illumination. The tritium gives a bright, crisp illumination at night, and should last for at least 12 years before needing to be refreshed. At that point, Trijicon will accept the optic to replace the tritium for you. This means that the reticle is illuminated in low-light, no-light, and daylight conditions- all without batteries.

The ACOG comes with two reticle options: a. They come with your choice of red or green illumination and both drop out to yards. I opted for the. Without any manual adjustments, this ranging reticle allows for bullet drop compensation out to meters. That accuracy combined with the unparalleled glass quality is why I pin it as the best ACOG for 3 gun. Despite the 1. With a little practice, you can go from nose to the charging handle or a few inches back with the stock fully extended.

This scope is durable- proven to withstand recoil on anything from a. You can bet that it passed the U. Military drop test requirements. Green Chevron for me. Red chevron, want a green horseshoe next. Donuts and Chevrons, both in red. Green horseshoe dot. Like a green Aimpoint out to , then like a scope past that. Quoted: The chevron inside of the horseshoe in the ACSS reticle is nice, although I haven't had any issues with indexing a pinpoint target at the 12 o'clock where I zeroed.

Green horseshoe. I like the crosshairs, the kind that come standard on the 3. They got rid of the annoying yard and have , , and so on. This cleans the center crosshairs up considerably making it possible for me to shoot much better groups. The donut is great for close range combat, it sucks for precision.

The horseshoe is a good compromise allowing a better sight picture for precision and an easy to use fast action dot for up close and personal. I'm not too crazy about the chevrons. I prefer the red Chevron, but I also have the green horseshoe and it's good too. The red chevron just shows up a lot better around these parts. Red Chevron. I like the sharp point of aim and simplicity. Although I'd probably prefer the red chevron, I do love the green chevron on mine.

Green horseshoe ta33 Red chevron ta11 Each for its own purpose, but I like both equally. Having used most the reticles, I'd say the chevron. Red or green, doesn't matter to me. The FOV isn't too cluttered and the chevron doesn't obscure much of the target. It is difficult for me to hoot groups with it though. I've also had a TA with the crosshair reticle. The only one I've kept is the red chevron.

Quoted: Having used most the reticles, I'd say the chevron. I used to like the chevron, but now prefer the horseshoe. The horseshoe is quicker to pickup at close range. There is no m hold if you want that. I think it would be extremely useful for posters to state, along with reticle preference, the general purpose s for which their preferred reticle is best suited.

Tell us what the reticle is best for, what it does OK, and what it will not do at all, or does poorly. For example: "I prefer "X" reticle for close range use. It is unsuitable for long-range purposes. Field of view for these scopes is approximately 8. Reticles at this level are specifically calibrated to either. The two targeting reticle options are either a dual-illuminated ballistic crosshair, or dual-illuminated horseshoe-dot.

Both are made of fiber-optics material that automatically adjusts brightness based on lighting conditions, with a tritium center dot that glows in low-light conditions. Trijicon builds windage and elevation adjusters right onto their ACOG scopes, so no extra tools are needed. This is one of the most versatile magnification and lens diameter options available. These scopes can be specifically calibrated for.

They have a field of view with only a 6. The sizable magnification strength extends usable rifle range, and the automatically adjusting fiber-optic reticle features bullet drop compensation for long-distance shooting. This scope does not come in low-height configurations, and so may not be comfortable on rifles with low cheek welds. The 3. These scopes are not compact, and so are much larger and heavier than the previous scopes.

They weigh 14 ounces, nearly a full pound of extra weight on your rifle. This scope has the largest exit pupil of the extended range scopes, nearly 10 millimeters, and the second largest eye relief, at 61 millimeters.

External windage and elevation adjusters operate at 3 clicks per inch at yards. Trijicon offers a wide selection of targeting reticles for its 3. Each reticle is dual-illuminated with fiber-optics and tritium. All sights are zeroed at meters. Chevron sights are 5 moa thick, or approximately 19 inches at meters. Competitive marksmen often prefer donut reticles, as they will not obscure the target. Trijicon makes a special 3. This special scope increases hit probability out to meters. The scope is easily zeroed for either meters or 10 meter BZO.

The Trijicon 3. It is also among the only ACOG scopes specifically designed for use with a machine gun system. The classic, the original. This magnification strength and objective lens diameter configuration has the most options of any ACOG scope Trijicon makes. They offer several models with the standard crosshair reticle, either dual-illuminated of illuminated with tritium only. They offer many different dual-illuminated reticles in scopes designed for use with the Bindon Aiming Concept.

They can last over 12, hours before the single battery must be replaced. The use of electricity over fiber optics allows the user to adjust the brightness of the reticle with a simple switch, and means that the reticle maintains the same level of brightness in all light conditions. It sits a full millimeters in length!

It sits relatively low, at only 69 millimeters. It weighs This ACOG scope is built for great accuracy in extended-range shooting, but is still designed to work well with the Bindon Aiming Concept. The reticle is only available in chevron, but comes with a flat-line top adapter. The large objective lens ensures that the image will be bright and clear even at such a high magnification.